Facebook-f Instagram Linkedin-in

News

Careers

0548-522040

Damage repair of panels and profiles

Damage repair of sandwich panels
Offerte aanvragen
Damage repair of sandwich panels
Specialist in

Facade damage restoration, cleaning & restyling of commercial properties

Here’s the translation from Dutch to English:

Damage Repair of Sandwich Panels

Damaged sandwich panels do not present a good appearance. However, damage can also lead to leaks, reduced insulation, and protection. This can cause underlying materials to be affected as well. Therefore, repair is a wise decision.

We specialize in repairing a wide range of damages to sandwich panels and profile cladding. We have been doing this for years for leading suppliers and contractors, on behalf of insurers and directly for property owners. Our skilled and dedicated employees can repair nearly all damages to sandwich panels from well-known global suppliers and manufacturers, such as Kingspan, Joris Ide, Falk, Arcelor, etc. We have developed repair methods that allow us to restore facade and roof panels invisibly on-site. Replacement is not necessary, saving costs.

Van Heemskerk masters all techniques in the field of damage restoration. We work exclusively with high-quality and proven paint systems, including those from the automotive industry. In damage restoration for commercial buildings and real estate, Van Heemskerk has established itself as a leading expert.

Do you have damage to your sandwich panels? Or would you like to know more about our solutions? Please feel free to contact us!

Request a quote
Get in touch

Why from Heemskerk?

Get in touch
  • More than 20 years of experience in roof and facade panels, both domestically and internationally.
  • Repairs through spot repair; therefore, in many cases, your panel does not need to be replaced.
  • Always a solution for your damage! If the damage cannot be repaired, we can also replace the panel.
  • Knowledge of all types of panels, profiles, and coatings.
  • The well-known manufacturers and suppliers of panels will recommend us to you.
  • Constantly engaged in devising innovative solutions and new technologies.
  • We have our own laboratory to further develop these techniques.

FAQ

I have a dent in my panel, can this be repaired invisibly?

In most cases, the damage can be repaired ‘invisibly.’ By this, we mean that someone who does not know where the damage was beforehand cannot find the repair! Of course, this does depend on the local conditions and the state of the substrate.

What products do you use? Is it the same as what is on the panels?

Panels and profiles are coated with a coil coating in 9 out of 10 cases, also known as pre-painted steel or aluminum. For example, a colorcoat prisma, PVDF, silicone polyester, HPS plastisol, etc. Coil coating is a factory-applied process under high temperature and therefore cannot be used for repairs.

The products we use originate from the automotive industry and have been specifically developed and are applicable for repair work on sandwich panels and profiles. The paints seamlessly match the durability and appearance of the applied coil coat. We are familiar with all types of coating systems and have the most common colors in stock.

What coatings and materials do you work with?

We work with the most well-known coating systems from all manufacturers and suppliers, including:

  • Prisma coating
  • PVDF coating
  • SP or polyester coating
  • Polyurethane coating
  • HPS coating, HPS ultra coating
  • Colorcoat
  • Corus colors
  • Nova coatings
  • British steel colors
  • Swedish steel coatings
  • Armatone coatings
  • Plastisol leather motif coating
  • Armatec coating
  • Spectrum coating
  • Benchmark coating
  • Hairexcel coating
  • Metallic coating
  • Pearlescent coating
  • Euromax coating
  • Foodsafe coating
  • Interior coating
  • XL forte coating
  • Vinyl coating
  • SAB 27/1000
  • VD 27/1000
  • VD 18/988 corrugated profile
  • SAB 158R/750
  • SAB 106/750
  • 18/988
  • Mounting market panels
  • Microlineering
  • KS1000MR
  • KS1000MMR
  • KS1000LV
  • KS1000MM
  • CP1000 Alpha
  • Hoesch Isowelle
  • Hoesch Integral
  • Evolution panels
  • Flat cassette systems
  • Colpro panels
  • Minimicro panels
  • Microrib panels
  • FALK 1000TR
  • FALK 1000GL
  • FALK 1060WB
  • FALK 1140KV
  • 988/18GL
  • Roof tile profiles
  • Composite panels
  • FALK 1170WZ
  • 32/1000 Hardeman
  • C300 panels
How about color differences?

No color or panel is the same, of course. Each new coil, despite having the same RAL code or name, has a different color or nuance. This is often due to the fact that most pigments for paint and coatings are derived from nature, leading to variations with each delivery. In the case of metallic finishes, there is an additional dimension referred to as ‘flop’ in industry terminology. This describes how the metallic particles rest on the surface, which can create dark or light effects. It’s similar to a long-haired carpet; the color doesn’t change, but if you rub over it, you create light or dark spots.

Panels and cladding fade over the years. One of our areas of expertise is that we can ‘tint’ the color on-site using the right pigments to match the existing color.

Van Heemskerk has mastered the techniques to mix the best-matching color during repairs. We strive to make the repairs ‘invisibly invisible’ to the customer’s satisfaction!

 

Which suppliers are you familiar with?

We are familiar with:

  • Kingspan
  • SAB
  • Hoesch / Hobone
  • Arcelor Mittal
  • Joris Ide
  • Plaum
  • Trimo
  • Cladding Point
  • Falk
  • Van Delft profiles
  • Salzgitter building elements
  • Itapanelli
  • Hardeman Veenendaal
  • Isocab
  • Brucha
  • Paroc
  • Unisol
  • KIM
  • Beckers
  • Colpro
  • Holland group
  • Metecno
  • Rex panels
Who do you work for?
  • Panel manufacturers and suppliers;
  • Construction and assembly companies;
  • Advertising companies;
  • Real estate developers;
  • Insurers;
  • Tenants and landlords;
  • End users;
  • Individuals, etc.
What is your area of operation?

We operate both nationally and internationally. Daily, we carry out work throughout the Netherlands, Belgium, and Germany. We are also project-based active far beyond these regions, such as in North and South America and the Middle East.

Do you also repair other materials?

Yes, the application area is very broad; please see other sections on the website for more information. For example, we repair aluminum frames and doors, but we also deal with composite or wooden constructions. Most of the time, we have a solution, even if it is not listed on the site.

How much does that cost?

Costs are often difficult to estimate in advance. This depends on various factors, such as the size, exposure, accessibility, type of paint, and local conditions.

The cost considerations are also related to replacing, dismantling, removing the finish, and construction with the potential for damage, leakage, etc. Many sandwich panels are often assembled with concealed fastenings and usually cannot be easily removed. Additionally, new deliveries almost always have color differences, so addressing this through repair and spray work is often more cost-effective.

Feel free to inquire about the possibilities with one of our experts so we can assist you further!

I have damage; how can I best get in touch?

It is best to contact the relevant regional expert via email, as indicated on the right side of this page. Please include some photographic material as well. You can also fill out the web form, and we will get in touch with you as soon as possible.

However, not everything can be properly assessed with a photo, so we often conduct site visits throughout the Netherlands, Belgium, and Germany. Therefore, we can often combine visits to come by and assess the damage!

Specialist in

gevelschadeherstel, reiniging & restyling van bedrijfspanden

WAT WIJ DOEN
Why choose us

The right solution for every property.

Follow us
Facebook-f Instagram Linkedin-in
gevel herstellen

Repair the facade

Is it always necessary to repair your facade? The facade of your commercial building plays a crucial role: it protects your building from the elements and contributes to the overall appearance of your business. However,

Read More

hagelschade uitdeuken

Hail damage dent removal after a heavy hailstorm

A heavy hailstorm can cause significant damage to the exterior of your commercial building. Roofs and facades made of aluminum sandwich panels and roof cladding are often the main targets. Are you a business owner

Read More

gevelreparatie

Want to have a facade repair carried out?

Would you like to have facade repairs carried out? The facade of your business premises is more than just a protective exterior; it is the calling card of your company. A well-maintained facade provides a

Read More

Go to news

What can we do for you?

Facebook-f Instagram Linkedin-in X-twitter
0548-522040
offerte aanvragen

Always stay informed instantly?

Stay informed about the latest developments and innovations by subscribing to our newsletter.

Design and implementation

Facebook-f Instagram Linkedin-in
Request a quote

Design and implementation

Offerte aanvragen

Offerte aanvragen