Renovation of cold storage rooms and production areas.

Specialized renovation of food-safe HACCP environments.
Specialized renovation of food-safe HACCP environments.
Specialist in

Facade damage restoration, cleaning & restyling of commercial properties

Renovation of Cold Stores and Production Areas

The walls and ceilings of your cold stores can become damaged, weathered, and more susceptible to contamination from dirt and mold after extensive use. Your cold store will become less representative and less hygienic. It will also become more difficult to meet the requirements of the HACCP inspection.

Van Heemskerk specializes in renovating cold stores, foodsafe, and food production areas. Moreover, we are often called upon for the renovation of other spaces where hygiene is of utmost importance. We can completely renew your hygienic spaces with various wall and ceiling systems. It is also possible to equip your cold store or production area with a second skin. This can be done quickly and easily without the need for demolition.

Examples of hygienic and food-safe spaces that Van Heemskerk repairs or renovates include: nurseries, slaughterhouses, food production companies, dairy production, all types of food-related production, beer and beverage industry, animal feed production, kitchens in restaurants and fast food outlets, hospitals, chemical factories, pharmaceutical manufacturers, car washes, etc.

Do you want to quickly and professionally renovate your cold store or hygienic space so that you can meet the standards again? Please feel free to contact us!

Why from Heemskerk?

  • Van Heemskerk has over 20 years of experience in the food-safe sector, both nationally and internationally. We are employed by many construction and assembly companies, often during the completion of newly built cleanrooms.
  • We adapt to the conditions of your company and work with you to create a plan of action. This way, you will experience minimal disruption during the work. You can resume using the rooms as soon as possible.
  • Extensive experience, especially with large cold and freezing storage facilities.
  • We provide you with cleaning certificates in accordance with HACCP standards.
  • Also experienced in renovating 'deep freeze' rooms.
  • Van Heemskerk distinguishes itself particularly in terms of specialized knowledge, quality, and flexibility.

FAQ

I have a dent in my panel; can you repair something like that invisibly?

In many cases, the damage can be invisibly repaired without a trace; much depends on the local conditions and the state of the substrate and maintenance performed. Our professionals successfully work daily on both new constructions and buildings that are 30-40 years old, so there is a lot possible.

What products do you use? Is it the same as what is on the panels?

Panels and profiles are equipped with a coil coating in 9 out of 10 cases, also known as pre-painted steel or aluminum. This includes colorcoat prisma, PVDF, silicone polyester, HPS plastisol, etc. Coil coating is a factory-applied process at high temperatures, which cannot be used for repairs.

The products we use originate from the automotive industry and are specially developed and applicable for repair work on sandwich panels and profiles. The paints seamlessly match the durability and appearance of the applied coil coat. We are familiar with all types of coating systems and have the most common colors in stock.

What about color differences?

However, no color or building is the same. Every new coil, despite having the same RAL code or name, has a different color or hue. This is often due to the fact that most pigments for paint and varnish are derived from nature, which can lead to variations with each delivery. In the case of metallic finishes, there is another dimension referred to in the industry as ‘flop’; this describes how the metallic particles rest on the surface, creating light and dark effects. Compare it to a long-haired carpet: the color doesn’t change, but when you rub over it, you create light and dark spots.

Buildings and cladding fade over the years, and one of our specialties is that we can ‘re-tint’ the color on-site with the right pigments so that it matches the existing color.

Van Heemskerk has mastered the techniques to mix the most suitable color during the repair process. We strive to make the repairs ‘invisibly unnoticeable’ to the satisfaction of our customers.

What is your work area?

We work both nationally and internationally. We operate daily throughout the Netherlands, Belgium, and Germany. We are also project-based active far beyond these areas, such as in North and South America and the Middle East.

For whom do you work?

We work for reputable panel manufacturers, building owners or tenants, property managers, assembly companies, construction companies, and individuals.

Do you also repair other materials?

Yes, the scope of application is very broad; see other sections on the website for this, including the repair of aluminum frames and doors. We also come into contact with composite and wooden constructions; we usually have a solution even if it’s not listed on the site.

I have damage; what is the best way to get in touch?

The best way is to contact the relevant regional expert via email; please attach photographic material for this on the right side of this page.

You can also fill out the web form. We will then contact you shortly.

Not everything can be accurately assessed with photos. We frequently travel throughout the Netherlands, Belgium, and Germany for work appointments. Therefore, we can often combine visits to see you.

What paints do you use for that?

Panels and profiles are equipped with a coil coating in 9 out of 10 cases, also known as pre-painted steel or aluminum. This includes products like colorcoat prisma, PVDF, silicone polyester, HPS plastisol, etc. Coil coating is a factory-applied process at high temperatures, which cannot be used for repairs.

The products we use originate from the automotive industry and are specially developed for repair work on sandwich panels and profiles. The paints seamlessly match the durability and appearance of the applied coil coat. We are familiar with all types of coating systems and have the most common colors in stock.

What does that cost?

Costs are often difficult to estimate and depend on the extent of the work, accessibility, type of paint, and local conditions. Ask one of our experts about the possibilities; in many cases, we can assist you further.

Cost considerations also often relate to replacement, disassembly, removal of finishing and construction, with the risk of damage, leakage, etc. Many sandwich panels are often equipped with concealed fastenings and cannot simply be removed.

Please note that new deliveries often also have variations. Repairing and repainting is often more cost-effective in many cases.

What coatings do you work with?

We work with the most well-known coating systems from all suppliers and manufacturers, including:

  • Prisma coating
  • PVDF coating
  • SP or polyester coating
  • Polyurethane coating
  • HPS coating, HPS ultra coating
  • Colorcoat
  • Corus colors
  • Nova coatings
  • British steel colors
  • Swedish steel coatings
  • Armatone coatings
  • Plastisol leather motif coating
  • Armatec coating
  • Spectrum coating
  • Benchmark coating
  • Hairexcel coating
  • Metallic coating
  • Pearl coating
  • Euromax coating
  • Food-safe coating
  • Interior coating
  • XL forte coating
  • Vinyl coating
Which suppliers are you familiar with?

We are familiar with:

  • Kingspan panels
  • SAB panels
  • Hoesch / Hobone
  • Arcelor Mittal
  • Joris Ide
  • Plaum
  • Trimo
  • Cladding Point
  • Falk
  • Van Delft profiles
  • Salzgitter building elements
  • Itapanelli
  • Hardeman Veenendaal
  • Isocab
  • Brucha
  • Paroc
  • Unisol
  • KIM
  • Beckers
  • Colpro
  • Holland Group
  • Metecno
  • Rex panels
Specialist in

gevelschadeherstel, reiniging & restyling van bedrijfspanden

Why choose us

The right solution for every property.

Is it always necessary to repair your facade? The facade of your commercial building plays a crucial role: it protects your building from the elements and contributes to the overall appearance of your business. However,

A heavy hailstorm can cause significant damage to the exterior of your commercial building. Roofs and facades made of aluminum sandwich panels and roof cladding are often the main targets. Are you a business owner

Would you like to have facade repairs carried out? The facade of your business premises is more than just a protective exterior; it is the calling card of your company. A well-maintained facade provides a

Offerte aanvragen

Offerte aanvragen