Skip to main content

Profile sheeting repairs

Did the profile sheets of your building get damaged? Every day, we repair a variety of damage to profile sheeting and flashings. Van Heemskerk specialises in professional repairs. We work directly for property owners and on behalf of manufacturers and suppliers of profile sheets, as well as insurers.

We professionally repair all kinds of profile sheeting by all well-known global manufacturers and suppliers, such as  SAB, Delft, Kingspan, Joris Ide, Falk, Arcelor and many others. Thanks to our specialist repair method, we can virtually invisibly repair your façade or roof panel on the spot, which means it won't need to be replaced.

When it comes to damage repair techniques, Van Heemskerk is a master. We only work with high-quality, proven paint systems, derived, among others, from the automotive sector. Van Heemskerk has proven itself as a leading expert in damage repairs to company buildings and properties.

Did your profile sheeting suffer damage? Or would you like to know more about our solutions? Feel free to contact us.

Why Van Heemskerk?

  • Over 20 years of experience in roof and façade panels, both in the construction and renovation sector.

  • We repair damage through on-site spot repairs. As such, in most cases, your panel won’t need to be replaced.

  • We are recommended by well-known sheeting manufacturers and suppliers both in the Netherlands and abroad.

  • We are familiar with all types of coatings and profiles, including trapezoidal and corrugated profiles.

  • Your façade or roof will be restored to its original condition.

  • We always offer a solution for your damage, either through repairs or replacement.

  • We are constantly working on the development of innovative solutions and new technologies.

  • We have access to our own laboratory to keep enhancing these technologies.

I have a dent in my profile sheet, can this be fixed invisibly?

In most cases, the damage can be fixed “virtually invisibly”. That is to say: if someone doesn't know where the panel was damaged, they'll never be able to find the repaired spot! Of course, this does depend on local factors and the condition of the substrate.

What products do you use? Are they the same as the coating on the panels?

9 out of 10 times, panels and profiles feature a coil coating, which is also known as pre-painted steel or aluminium. This could be a colorcoat prisma, PVDF, silicon polyester, or an HPS Plastisol coating, among others. Coil coating is a factory process involving extreme heat. As such, it cannot be applied for repairs.

The products we use are derived from the automotive sector and were specifically designed for repairs to sandwich panels and profiles. The paints seamlessly fit the applied coil coat when it comes to durability and appearance. We are familiar with all types of coating systems and always have the most common colours in stock.

What is the deal with colour differences?

No two colours or buildings are the same. Even if they have the same RAL code or name, every new coil will have a different colour or appearance. This is because most pigments for paints and lacquers are derived from nature, so their properties may differ from shipment to shipment. This phenomenon has an extra dimension in case of metallics, which professionals call “flop”. Flop refers to the way the metallic particles are positioned on the surface. This can result in a darker or lighter effect. It's not unlike a high-pile rug: the colour doesn't change, but you get lighter or darker spots depending on the position of the piles.

Properties and sheeting panels suffer from discolouration over the years. One of our specialisations is “retinting”. This means we use the right pigments to touch up the damage, so it matches the existing colour.

Van Heemskerk is an expert in mixing the most suitable colour during repairs. We strive for customer satisfaction by making our repairs “virtually invisible!”

What coatings do you work with?

We work with the most common coating systems of all manufacturers and suppliers, including:

  • Prisma coating
  • PVDF coating
  • SP and polyester coating
  • Polyurethane coating
  • HPS coating, HPS ultra coating
  • Colorcoat
  • Corus colors
  • Nova coatings
  • British steel colors
  • Swedish steel coatings
  • Armatone coatings
  • Plastisol leather-grain coating,
  • Armatec coating
  • Spectrum coating
  • Benchmark coating
  • Hairexcel coating
  • Metallic coating
  • Mother-of-pearl coating
  • Euromax coating
  • Foodsafe coating
  • Interior coating
  • XL forte coating
  • Vinyl coating
What suppliers are you familiar with?

We are familiar with:

  • Kingspan
  • SAB
  • Hoesch / Hobone
  • Arcelor Mittal
  • Joris Ide
  • Plaum
  • Trimo
  • Cladding Point
  • Falk
  • Van Delft Profielen
  • Salzgitter Bauelemente
  • Itapanelli
  • Hardeman Veenendaal
  • Isocab
  • Brucha
  • Paroc
  • Unisol
  • KIM
  • Beckers
  • Colpro
  • Holland groep
  • Metecno
  • Rex panels
Whom do you work for?
  • Panel manufacturers and suppliers;
  • Construction and assembly companies;
  • Advertising firms;
  • Real estate developers;
  • Insurers;
  • Tenants and renters;
  • End users;
  • Private individuals, etc.
What is your operating area?

We operate both within the Netherlands and abroad. Every day, we perform our activities throughout the Netherlands, Belgium and Germany. However, we also have projects beyond this scope, such as in North and South America and the Middle East.

Do you also repair other materials?

Yes, our service covers a wide range of applications. Please refer to the other parts of this website for more information. This includes, for example, repairs to aluminium frames and doors, as well as composite or wooden constructions. We can usually offer a solution, even though this is not necessarily listed on our site.

What does it cost?

It is hard to estimate the costs in advance. They depend on a variety of factors, such as size, lighting, accessibility, paint type and local circumstances.

The price is also affected by the costs of replacement, dismantling and removal of the surrounding construction, which can cause damage, leaks etc. Sandwich panels are often attached with hidden fasteners and cannot simply be removed. On top of that, new deliveries almost invariably differ in colour, which means that repairs and spraying are often a more affordable option.

Contact one of our experts for non-binding information on the possibilities. We are happy to help you!

I have damage to report. What is the best way to contact you?

It's easiest to contact the regional expert in question via email. You can find more information about this on the right-hand side of this page. Please attach pictures to your request. You can also fill out the online form, and we will contact you as soon as possible.

However, it is difficult to make an accurate assessment based on a picture, so we regularly visit locations throughout the Netherlands, Belgium and Germany. This means we are likely to be able to drop by and take a look at your damage!

Other services

Special cleaning
More information

Jutestraat 2
7461 TR Rijssen
The Netherlands
Tel: +31 548-522040